2027 KTM 300 SX - K37729











Get in Touch
Description
2027 KTM 300 SX
IT'S HUNTING SEASON
When it comes to power-to-weight ratios, the KTM 300 SX writes the rule book. Now with learnings taken directly from the KTM Factory Racing teams, and a care package labeled ""Go get 'em!"", the KTM 300 SX is engineered for one task alone - to lead from the front.
Before The Gate
LESS FOCUS ON THE TOOL, MORE FOCUS ON THE TRACK
Serviceability
The KTM SX and SX-F range is engineered and designed to provide riders with easy-to-access service parts, as well as suspension adjustability. This permits faster trackside and off-season maintenance, as well as simplifying motocross for novice riders without pit crews. For 2026, a new threaded radiator cap allows easier and faster opening with reduced force.
CLICK INTO ACTION
Easy Suspension Adjustment
As always, the suspension boasts an easy tool-free setup at both ends, ensuring you chase down the podium in total control. On the rear, a hand-adjustable dual compression option allows riders to adjust high- and low-speed settings in a matter of seconds. The forks on the front end are also easily modified thanks to hand-adjustable clickers on the bottom of the fork shoe and top cap.
NO JETS - ONLY ROCKET SHIPS
Electronic Fuel Injection
Pre-mix gets a remix across the 2-stroke KTM SX range, with Electronic Fuel Injection setting the standard. Now there's no setup pre-race, And thanks to the Keihin EFI and reed valve case design, you can be guaranteed of laying down optimal power at any altitude, all of the time. For 2026 there is a new fuel protector cap: you'll still have quick and easy access for maintencance but now more safety against any outside damage and accidental opening as well as preventing dirt from entering the sides of the connector.
CHUGGA CHUGGA, RING DING DING!
Electric Start
Picture this; You're 7 laps into an absolute ripper of a race. You miss your line and end up stalling in a deep rut. But don't sweat it. All you do is press the starter button and you blast off again to take the flag. This is the reality on the KTM SX models. Thanks to a 12,8V 2 Ah lithium ion battery is placed under the rider's seat, a high-quality starter & pickup and super robust design, the only thing you'll be kicking - is ass.
Start Strong
PICK YOUR POWER
Selectable Maps
The KTM SX models features a map select switch allowing the racer to switch between 2 engine maps. Map 1 provides a linear, predictable power delivery, while Map 2 gives it the full beans with crisp, explosive power output.
SMOOTHER POWER DELIVERY
EFI + Power Valve
With EFI comes great rideability. Along with the electronic fuel injection and a power valve on the KTM SX models, allowing for more usable power throughout the rev range. Smoother power means better traction. Better traction means holeshot heaven!
UNMATCHED PERFORMANCE
Performance
The 300 cc 2-stroke powerhouse brings a only choice of weapon into the MX Open category and provides more choice for racers looking for maximum power at the least possible weight. Along with low maintenance costs, an overall engine mass of just %":& LB (23,9 kg), the KTM 300 SX provides pure performance. And then some.
PICK YOUR POWER
Selectable Maps
The KTM SX models features a map select switch allowing the racer to switch between 2 engine maps. Map 1 provides a linear, predictable power delivery, while Map 2 gives it the full beans with crisp, explosive power output.
Calm Under Fire
FLUID RIDER MOTION
Ergonomics
Tank shrouds using bi-compound plastics channel air towards the radiators more efficiently, while a concise fuel tank roll, makes for a tighter, more secure fitment, reducing the chance of frame scrubbing and dramatically improving durability. All this works alongside the specially-developed rider triangle, to provide unmatched knee contact and gripping surfaces - especially when standing on the pegs.
SLEEKER FOR YOU TO SCRUB CLEANER
Absolute Control
Get ready for a full-on berm assault. The KTM SX and SX-F machines feature revised frame updates developed with input from KTM Factory Racing. For starters, the area around the rear shock mount is streamlined, with optimized engine mounts and cut-outs for improved chassis flex. The front area of the frame features optimized wall thickness with updated engine mounts.
Hit The Big Stuff
DIGGING THE DIRT
Tires
Getting power hooked into the dirt is a tough job. However, hours of research and testing have led the KTM Motocross range to the Dunlop GEOMAX MX34. Providing unmatched stability and control at the highest level, the rubber features a rigid carcass and rubber compound that improves damping and absorption, maintaining performance up to 30% longer than previous models. Progressive Cornering Block Technology also improves grip in the berms, while the rear pattern has a tall and wide center block for desirable traction and control everywhere else. Lastly, this unique block arrangement works to dispel mud buildup, ensuring traction in even the muddiest of track conditions.
UNFLAPPABLE FRONT END
WP XACT Fork
Let's get the technical parts out of the way first; the 48 mm WP XACT AER forks fitted to the KTM SX and SX-F line-up features a capsulated air spring and pressurized oil chamber for progressive and consistent damping, while oil and air bypasses reduce pressure peaks. In combination with the mid-valve damping system, all this provides exceptional feedback and rider comfort. The fork also has settings which not only compliment the frame and rear linkage, but ensures stellar performance at all levels. Speaking of settings, these are easily adjusted via a single air pressure pre-load valve, as well as easy-access click adjusters for compression and rebound. Additionally, the WP air pump needed to adjust the fork's air pressure is provided as standard in the buy-pack.
TRACK SMOOTHER
WP XACT SHOCK
Keeping things in check at the rear, the WP XACT rear shock uses settings directly from the KTM Factory Racing Teams. The frame and shock geometry provide increased ground clearance at the linkage, reducing the risk of bottoming out. Small-diameter linkage bolts save weight, while refined linkage seals improve rear shock response and advanced damping characteristics. Proper setup is advised for optimal performance.
RACING ON RAILS
Stability
The KTM Motocross range has a special rear brake pedal adding additional stiffness, bending resistance and braking feel to the overall package. At the other end, a forged steering head connection and CNC-milled triple clamps, make for the perfect alignment of the fork tubes. This precise geometry of the fork clamps ensures highly responsive and smooth fork action - not to mention unwavering stability when charging across ruts and onto the podium.
Maintaining Momentum
PRECISE, LAP AFTER LAP
Consistency
Count on a durable chain guide and chain guard and minimize the chances of hooking on external objects - especially in extremely muddy terrain while reducing dirt build-up around the swingarm and rear sprocket. For 2027 we've also modified the fixing points and routing of the wiring harness so it's less prone to wear and damage.
UNOBTRUSIVE IMPACT
Energy absorption
Pre-mix gets a remix across the 2-stroke KTM SX range, with Electronic Fuel Injection setting the standard. Now there's no more fiddly jetting setup pre-race, And thanks to the Keihin EFI and reed valve case design, you can be guaranteed of laying down optimal power at any altitude, all of the time. The fuel protector cap delivers easy maintenance access combined with improved protection against impact, accidental opening, and dirt ingress at the connector sides.
NOTHING TO HOLD YOU BACK
Ground clearance
The shock absorber geometry on the KTM SX and SX-F machines gives decent ground clearance for the linkage, with the topology-optimized die-cast footpegs being less susceptible to hooking on deep ruts, and take-offs when scrubbing.
Harnessing Gravity
Mass Centralization
With a strong focus on mass centralization, KTM SX and KTM SX-F engines are designed to concentrate rotating mass at the core, working in perfect harmony with the chassis. The result is lighter, more agile handling that runs rings around the competition.
Info
Industry
Powersports
Make
KTM
Model
300 SX
Trim
Base
Year
2027
Msrp
9899
Price
9899
Stock Number
K37729
Category
DIRT BIKE
Subcategory
DIRT BIKE
Condition
New
Location
Karl Malone ADS Powersports
Vin
VBKSXP23XVM337729
Color
ORANGE
Specifications
Enginee
stroke: 2-Stroke | Cylinder: Single cylinder | Primary drive: 26:72 | Design: 1-cylinder, 2-stroke engine | EMS: Vitesco Technologies EMS
Engine Disp to Wgt
293.2 cm³
Transmission
5-speed
Fuel System
mixture generation: Keihin EFI, throttle body 39 mm
Clutch
Operation: Brembo hydraulics | Type: DDS multi-disc wet clutch | Primary drive teeth: 72 | Wet, DDS multi-disc clutch, Brembo hydraulics
Frame
Design: Central double-cradle-type 25CrMo4 steel
Front Brake
Disc brake |
Rear Brake
Disc brake
Rear Subframe
Design: Aluminum-reinforced polyamide
Chain
520, Non-sealed
Suspension (Front)
Adjustment: Compression (high and low speed), rebound | WP XACT-USD (AER), Ø 48 mm | Travel (front): 310 mm
Suspension (Rear)
Adjustment: Compression and rebound adjustable | WP XACT Monoshock with linkage | Travel (rear): 300 mm
Seat Height
958 mm
Ground Clearance
354 mm
Fuel Capacity
7.2 l
Weight (Wet)
99.4 kg